 |
 |
 |
|
3 Ton Full Cased Coil
These cooling and heat pump coils are designed to be installed with York furnaces and to be matched with York cooling and heat pump outdoor units. All coils utilize a TXV to provide our customers with the optimum performance and refrigerant control required for 13+ SEER systems. Coils can be installed for use with R410A by changing the bolton TXV.
Upflow Coils Full Cased - Designed for high-efficiency to match any system, upflow or downflow application.
Dimensions:
14.5" Wide 22" Long 24.5" Tall
Bottom Opening: 13.5" X 20 1/4"
Top Opening: 13 3/8" X 20 3/8"
Special Benefits
Thermal Expansion Valve – Provides flexibility to convert any coil to R22 or R410A refrigerant. A true bolt-on TXV, valve assembly and equalizer tube are bolt-on, no brazing required. TXV and sensing bulb are mounted inside the cased coil cabinet. (Must be field supplied)
MicroBlue™ Coated Fins – All coils are treated with a MicroBlue™ Hydrophilic coating to enhance the removal of condensate during the refrigeration cycle and reduce the possibility of water blow-off. The MicroBlue™ coating also reduces the growth of germ causing microbes.
Insulated Cabinet – All evaporator coil cabinets are thermally insulated with foil faced insulation to prevent sweating.
Internally Clean – All evaporator coils are factory leak-tested, dehydrated, sealed and shipped with a holding charge. The suction and liquid lines are sealed with rubber plugs, no cutting of connection stubs to attach line set.
Durable Finish Inside and Out parts are made of G90 pre-painted steel i.e. triangular plates, top plates, horizontal supports etc. (Coil header plates are non-painted due to the brazing process during production.)
Optimum Heat Transfer - Using the latest in heat transfer technology, staggered rows of copper tubes are mechanically expanded into aluminum fins to provide optimum air to surface contact for ample moisture removal as well as high performance ratings. |
|
|
|
|
|
|
|
|
